Made in USA for 23+ years! Custom mount your Koi Super Feeder indoors or outdoors. Adjust it from very tiny snacks to larger portions!
This XL "basic" package Super Feeder holds up to 1.8 gallon capacity and comes with an outdoor approved 120V power adapter with a voltage output of 12VAc ready to use with your own outdoor timer to trigger it. The power adapter has a 6' cord w/plug and comes with two crimp blade connectors and can be mounted to a piece of lumber or pipe (not supplied). All you will need is an outdoor 120V programmable timer with a regular 3 or two-prong outlet and some 2-conductor wire to operate it (small gage wire will work just fine). Although the 1.5 gallon hopper will slip right on the feeder, one clear extension is recommended to let you know when the food is getting low. Combos complete with timer and 50' of wire are available. Voltage required: Power supply (supplied) 120V-60Hz 12VAC or DC output, all timers 120V 60Hz--Wi-Fi Socket 110V-240VAC 50-60Hz. USA style plugs only-not battery operated but could be. If a 120V power source is not available, you may even use any of our 6-24V timers listed here to use your own low voltage power source (some wiring required).
Mounting examples: http://www.super-feed.com/outdr.html
INTERNATIONAL CUSTOMERS WITH 220-240V: Please click on "Q&A/Shipping" above and http://www.super-feed.com/international_order_policy.htm
How to use the feeder with a regular external timer: Basically any plug-in timer like a lamp timer can be used. Just follow directions included in feeder's manual. If using a digital timer, compatibility may be an issue with the included outdoor power supply unless using the ACDT-35 we have tested and recommend. Any analog timer can be used.
OVERALL SIZE: Feeder overall size mounted (space needed): 12 x 3 x 22 inches tall
How to use feeder with a home automation system:
For Wi-Fi control, we recommend a system like the Wemo Wi-Fi switch by Belkin. We also recommend various systems that are currently being used available at smarthome.com Note: Many Wi-Fi systems offered on the market today are perpetually vulnerable to perpetual changes and updates that can quickly render some products unusable. In regards to other Wi-Fi switches on the market, some may not work if the socket does not turn off completely (some do and some may not), meaning that any residual power coming out of it during its off time will prevent the feeder from resetting itself between programmed feed cycles.
You can plug the supplied power adapter into a 100-240V module controlled by your system. You then turn the module on for a couple of minutes with your system, which in turn triggers and powers the feeder. The feeder runs only for time in seconds you adjusted the feeder to give you the portion you want and then stops. When you turn the power off for a couple of minutes, the feeder resets itself and is once again ready to be triggered at the next programmed time. If your system has 12 to 24 volts output ac or dc, you can do away with the feeder's own power adapter and hook directly to the feeder. You could also control the feeder's run time entirely with your external system by setting the feeder's feed time controller to its maximum setting of 70 seconds. NOTE: Iris brand "smart outlet" in-wall has been reported to work with smart phone. Z-Wave Smart Outlet the "Quirkey+GE Outlink Smart Outlet systems will work. Some systems by Leviton may not work properly due to the fact that their systems such as Z-Wave module, Z-Wave receptacle and dimming modules may not completely turn off and thus not work with the Super Feeder. Any socket must not bleed any voltage while in off mode.
Examples of home automation systems used with this feeder:
Remote-Controllable Dual Outlet: http://www.smarthome.com/insteon-2663-222-on-off-outlet-white.html/